StarTech.com DisplayPort 1.2 Cable w/ Latches - 6ft / 2m - HBR2 - 4K x 2K Display - Certified DP to DP Video Cable M/M (DISPLPORT6L)

Product Information

Releases MyDP Standard". VESA. 27 June 2012. Archived from the original on 17 March 2016 . Retrieved 10 November 2013. VESA DisplayPort (DP) Standard, Version 2.0". Video Electronics Standards Association (VESA). 26 June 2019. a b Although this format slightly exceeds the maximum data rate of this transmission mode with CVT-R2 timing, it is close enough to be achieved with non-standard timings Daisy-chaining is a feature that must be specifically supported by each intermediary display; not all DisplayPort 1.2 devices support it. Daisy-chaining requires a dedicated DisplayPort output port on the display. Standard DisplayPort input ports found on most displays cannot be used as a daisy-chain output. Only the last display in the daisy-chain does not need to support the feature specifically or have a DP output port. DisplayPort 1.1 displays can also be connected to MST hubs, and can be part of a DisplayPort daisy-chain if it is the last display in the chain. [37] :§2.5.1 The DisplayPort AUX channel is a half-duplex (bidirectional) data channel used for miscellaneous additional data beyond video and audio, such as EDID ( I 2C) or CEC commands. [8] :§2.4 This bidirectional data channel is required, since the video lane signals are unidirectional from source to display. AUX signals are transmitted across a dedicated set of twisted-pair wires. DisplayPort 1.0 specified Manchester encoding with a 2 MBd signal rate (1 Mbit/s data rate). [8] :§3.4 Version 1.2 of the DisplayPort standard introduced a second transmission mode called FAUX (Fast AUX), which operated at 720 MBd with 8b/10b encoding (576 Mbit/s data rate), [37] :§3.4 but it was deprecated in version 1.3.

Unidirectional– Although the dual-mode standard specifies a method for DisplayPort sources to output DVI/HDMI signals using simple passive adapters, there is no counterpart standard to give DisplayPort displays the ability to receive DVI/HDMI input signals through passive adapters. As a result, DisplayPort displays can only receive native DisplayPort signals; any DVI or HDMI input signals must be converted to the DisplayPort format with an active conversion device. DVI and HDMI sources cannot be connected to DisplayPort displays using passive adapters. Embedded DisplayPort Standard Ready from VESA" (PDF). VESA. 23 February 2009. Archived from the original (PDF) on 7 July 2012. VESA Publishes Embedded DisplayPort Standard Version 1.5". 27 October 2021 . Retrieved 28 October 2021. VESA Experiences Acceleration of MyDP Standard Adoption in Mobile Devices". Archived from the original on 22 March 2016 . Retrieved 10 March 2014.The first version, 1.0, was approved by VESA on 3 May 2006. [6] Version 1.1 was ratified on 2 April 2007, [7] and version 1.1a was ratified on 11 January 2008. [8] Not all DisplayPort cables are capable of functioning at the highest levels of bandwidth. Cables may be submitted to VESA for an optional certification at various bandwidth levels. VESA offers four levels of cable certification: Standard, DP8K, DP40, and DP80. [41] :§4.1 These certify DisplayPort cables for proper operation at the following speeds: The Case For DisplayPort, Continued, And Bezels". Tom's Hardware. 15 April 2010 . Retrieved 28 July 2011.

VESA Rolls Out Production-Ready Embedded DisplayPort Standard 1.4 for Mobile Personal Computing Devices". VESA. 27 October 2015 . Retrieved 28 October 2015. a b c "DisplayPort Technical Overview" (PDF). VESA.org. 10 January 2011 . Retrieved 23 January 2012.DisplayPort 1.2 has more bandwidth at 21.6 Gbit/s [75] (17.28 Gbit/s with overhead removed) as opposed to HDMI 2.0's 18 Gbit/s [76] (14.4 Gbit/s with overhead removed). Mini DisplayPort (mDP) is a standard announced by Apple in the fourth quarter of 2008. Shortly after announcing Mini DisplayPort, Apple announced that it would license the connector technology with no fee. The following year, in early 2009, VESA announced that Mini DisplayPort would be included in the upcoming DisplayPort 1.2 specification.

Direct Drive Monitor (DDM) 1.0 standard was approved in December 2008. It allows for controller-less monitors where the display panel is directly driven by the DisplayPort signal, although the available resolutions and color depth are limited to two-lane operation. a b VESA DisplayPort Standard, Version 2.1. Video Electronics Standards Association (VESA). 10 October 2022.

{{-labels.sendtoColleague}}

DisplayPort Alternate Mode for USB Type-C Announced– Video, Power, & Data All Over Type-D". anandtech.com . Retrieved 14 October 2014.